Product Reviews

SMALLRIG Universal Phone Holder Mount Review

A versatile clamp for creators who want to mount different smartphones on a camera or tripod and add a microphone or light.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review is for creators who want a flexible way to attach a smartphone to a camera or tripod.

Its adjustable clamp, portrait and landscape positioning, and top cold shoe make it useful for filming setups that need room for an accessory.

SMALLRIG Phone Mount Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A versatile clamp for creators who want to mount different smartphones on a camera or tripod and add a microphone or light.

  • Clamps smartphones 57–88 mm wide, covering a range of devices.
  • Mounts to a camera or tripod through a bottom 1/4"-20 threaded hole or cold shoe.
  • Switches between landscape and portrait orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.

Pros

  • Broad 57–88 mm clamping range works across many phone sizes.
  • Multiple mounting points make it adaptable to camera and tripod setups.

Consider before buying

  • The 500 g maximum capacity limits how much weight the phone and attached accessories can add up to.
  • Buyers need to verify phone width with its case before relying on the stated compatibility range.
Read the full review summary

The 4382 is a compact phone clamp with a 1/4"-20 threaded hole and a cold shoe at the bottom for mounting on a camera or tripod.

It accepts phones 57–88 mm wide, rotates between portrait and landscape, and has two rotary joints for adjusting the angle.

A cold shoe on top provides a place for a microphone or light, while additional threaded holes accommodate compatible power bank holders.

This design suits mobile video, live streaming, interviews, and vlogging when you want to build around a phone you already own.

The broad width range makes it more flexible across phone models than a mount designed around a single attachment style, though you will need to check your phone’s width and the dimensions of any case.

Its stated maximum load capacity is 500 g, so keep the phone and any mounted accessories within that limit.

The buying factors

SMALLRIG Phone Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Phone compatibility

The 57–88 mm clamp width covers a useful range of smartphones, subject to checking the device with its case.

9/10

Mounting flexibility

A bottom 1/4"-20 thread and cold shoe support camera and tripod mounting options.

8/10

Orientation control

It supports portrait and landscape positioning, with two rotary joints for angle adjustment.

8/10

Accessory expansion

The top cold shoe accepts a microphone or light, and threaded holes support compatible power bank holders.

8/10

Portability

At 73 g and about 4.06 × 1.63 × 1.23 inches, it is a compact addition to a mobile filming kit.

7/10

Load capacity

The 500 g maximum gives a clear limit to consider when combining a phone and accessories.

Key Features and Specifications of SMALLRIG Phone Mount

  • Clamps smartphones 57–88 mm wide, covering a range of devices.
  • Mounts to a camera or tripod through a bottom 1/4"-20 threaded hole or cold shoe.
  • Switches between landscape and portrait orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.
  • Top cold shoe provides a mounting point for a microphone or light.
  • Threaded holes support compatible SMALLRIG power bank holders; maximum load capacity is 500 g.
  • The holder weighs 73 g and measures about 4.06 × 1.63 × 1.23 inches.

Pros and Cons of SMALLRIG Phone Mount

Pros

  • Broad 57–88 mm clamping range works across many phone sizes.
  • Multiple mounting points make it adaptable to camera and tripod setups.
  • Portrait and landscape switching suits varied framing needs.
  • Top cold shoe and threaded holes support a more equipped phone rig.

Consider before buying

  • The 500 g maximum capacity limits how much weight the phone and attached accessories can add up to.
  • Buyers need to verify phone width with its case before relying on the stated compatibility range.
  • The package includes the holder only, so a camera, tripod, microphone, and light must be supplied separately.

Who Should Buy SMALLRIG Phone Mount?

Good fit

Consider the SMALLRIG Universal Phone Holder Mount if you move between phone models or want to use the same clamp for tripod filming, camera-top recording, interviews, and live streams.

The combination of a bottom thread and cold shoe gives you two ways to integrate it into a setup, while the top shoe offers a convenient point for a microphone or light.

It is especially appealing when orientation changes are part of your workflow. The mount supports both portrait and landscape framing, and its two joints let you adjust position without relying on a single fixed angle.

Before buying, measure your phone across the clamped area with its case attached and total the weight of the phone and any accessories against the 500 g maximum.

Who should skip it

Skip it if your phone falls outside the 57–88 mm width range, or if your intended phone-and-accessory combination exceeds 500 g.

Look elsewhere if you need the phone holder to arrive as a complete filming kit: this package contains the holder only.

How the SMALLRIG Phone Mount fits a mobile filming rig

A clamp for phones you already own

The 57–88 mm width range is the key compatibility measure.

It allows one holder to accommodate phones of different widths, but a case can change the fit, so measure the device at the point where the clamp grips it.

This gives buyers a practical check before building the mount into a repeatable setup.

Orientation changes and framing

Portrait and landscape support helps the same phone serve vertical clips, interviews, and wider video. The mount locks when rotated 90 degrees, and two rotary joints provide additional positioning up to 180 degrees.

That combination gives more framing options than a holder with one fixed angle, though the final arrangement still depends on where the camera or tripod is placed.

Mounting and accessory points

The bottom 1/4"-20 thread and cold shoe offer alternative ways to connect the holder to a camera or tripod.

A second cold shoe sits on top for a microphone or light, while threaded holes are intended for compatible power bank holders.

These interfaces make the mount useful as a building block for a rig; buyers should plan around the accessories they actually intend to attach.

Keep the combined load in view

The 500 g maximum is an important planning limit for a phone-based rig. Count the phone and the weight of accessories together before mounting them, especially if the top shoe or threaded holes will be occupied.

At 73 g, the holder itself is light, but that does not increase the stated capacity for the rest of the setup.

Alternatives to SMALLRIG Phone Mount

One useful alternative is included; the supplied choices offer only one distinct competing model for this mounting need.

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you want a width-adjustable clamp for phones across the stated range.

Consider the 5156 if you use a compatible MagSafe iPhone and prefer its magnetic attachment approach; check that the phone is supported and account for its noted risk of detachment from external impacts.

  • The 5156 uses a magnetic mount designed for iPhones with MagSafe, and includes dual rotating shafts, accessory interfaces, and a 500 g load capacity.
  • The 4382 uses an adjustable 57–88 mm clamp, which can suit different phones that fit that width range.

Is SMALLRIG Phone Mount Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for mobile creators who want adjustable phone positioning and several mounting interfaces in a compact holder.

Its 57–88 mm clamp, portrait and landscape support, and top cold shoe cover practical needs for a flexible filming rig.

Check your phone’s width with its case and keep the phone-plus-accessory weight below 500 g.

If those limits fit your setup, this holder offers a versatile foundation; if they do not, choose a mount designed around your device and rig.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A versatile clamp for creators who want to mount different smartphones on a camera or tripod and add a microphone or light.

  • Clamps smartphones 57–88 mm wide, covering a range of devices.
  • Mounts to a camera or tripod through a bottom 1/4"-20 threaded hole or cold shoe.
  • Switches between landscape and portrait orientation and locks when rotated 90 degrees.
  • Two rotary joints allow up to 180 degrees of adjustment.

Written by

ecofloridamag.com Editorial Team

Editorial team

ecofloridamag.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A versatile clamp for creators who want to mount different smartphones on a camera or tripod and add a microphone or light.

  • Clamps smartphones 57–88 mm wide, covering a range of devices.
  • Mounts to a camera or tripod through a bottom 1/4"-20 threaded hole or cold shoe.
Check Video Reviews on Amazon