Altitude Air Pressure Calculator
Estimate standard atmospheric pressure at a selected elevation using the barometric formula. This simplified model assumes a standard atmosphere and does not account for local weather or measured conditions.
Calculators
Decision-support tools for sizing, cost, capacity, runtime, ownership, and other practical planning questions.
Estimate standard atmospheric pressure at a selected elevation using the barometric formula. This simplified model assumes a standard atmosphere and does not account for local weather or measured conditions.
Estimate air temperature at a second elevation using a supplied starting temperature and the standard lapse-rate assumption of 6.5°C per 1,000 m. This simplified estimate does not account for local weather or terrain.
Estimate an appliance's electricity use and cost from its rated power, daily operating time, days used, and your electricity price. The estimate assumes the appliance draws its entered power throughout the stated operating time.
Estimate an appliance’s running power in watts from its voltage and current for emergency preparedness planning. This arithmetic estimate does not account for startup surges or replace the appliance nameplate or manufacturer guidance.
Estimate the ideal charging time for a battery from its capacity and the charger's current, assuming a constant charging rate and no losses.
Estimate the total liters of water to plan for a camping group based on the number of people, daily liters per person, and trip length.
Estimate annual tailpipe carbon dioxide emissions from a car using yearly distance and fuel economy. The estimate assumes gasoline combustion and excludes vehicle manufacturing, fuel production, and other greenhouse gases.
Estimate greenhouse gas emissions in kilograms of carbon dioxide equivalent (kg CO₂e) from up to three activities. Enter each activity amount and its own emissions factor; this worksheet multiplies each amount by its factor and adds the results. Factors must use kg CO₂e per activity unit and should come from a source appropriate to your location, reporting method, and chosen boundary.
Estimate annual household emissions from home energy, driving, and air travel using simplified emissions factors. Results are an illustrative worksheet estimate, not a full greenhouse gas inventory.
Convert one latitude or longitude from degrees, minutes, and seconds (DMS) to signed decimal degrees. Choose the matching hemisphere. This performs arithmetic conversion only and does not change coordinate datum or projection.
Estimate dew point in °C from air temperature and relative humidity using a moist-air approximation for relative humidity from 51% to 100%.
Estimate the use-phase emissions associated with charging an electric vehicle using your electricity emissions factor. Enter annual driving, vehicle efficiency, and grid emissions intensity. This worksheet excludes vehicle and battery manufacturing, fuel production, and other lifecycle impacts.
Estimate a device or appliance's electricity use from its power rating and operating time. The result is energy consumption in kilowatt-hours (kWh), not a bill or cost estimate.
Estimate a target emergency fund from your monthly essential expenses and chosen number of months to cover. This simple worksheet assumes expenses stay constant and does not account for interest, inflation, taxes, or changes in income.
Estimate electricity cost from energy use, your electricity price, and the number of days in the billing period. The estimate assumes usage is steady each day and applies one rate to all energy used.
Estimate stacked firewood volume in cords from a woodpile’s length, height, and average depth. This is a geometric estimate that assumes reasonably uniform stacking.
Estimate flight-related carbon dioxide equivalent emissions from distance, cabin class, and passenger count using a transparent per-passenger distance model. The estimate excludes airport access, lodging, and other travel activities.
Estimate and compare monthly household living costs in Florida using your own housing, utilities, food, transportation, and other spending estimates. This budget worksheet does not use live prices or rank Florida locations.
Estimate hotel taxes on a Florida stay using the taxable room price, number of nights, and the combined tax rate supplied for your booking. Rates vary by location and property, so confirm the applicable rate with your hotel or booking details.
Estimate the combined volume of your moving boxes in cubic feet from their count and outside dimensions in inches. The estimate assumes every box has the same dimensions.
Estimate the fuel cost for a Florida trip using trip distance in miles, vehicle fuel economy in miles per gallon, and fuel price in dollars per gallon.
Estimate the purchase value of food discarded over a chosen period from the amount wasted, its price per unit, and how often that amount is discarded. This is a simple estimate based on your own inputs.
Convert a volume in US gallons to liters using the standard US liquid gallon conversion factor.
Estimate the minimum generator running capacity for selected emergency loads. Add each appliance's running watts and starting watts, then account for the largest startup surge that may occur while the other selected loads are running.
Estimate annual household emissions from home energy, driving, and air travel using simplified activity-based factors. Results are approximate and depend on the factors stated in the article.
Compare estimated annual heating operating costs for a current heating system and a heat pump using the annual heat demand, efficiencies, and energy prices you enter. This simple worksheet excludes installation costs and does not predict actual climate or equipment performance.
Estimate calories burned while hiking from body weight, hiking duration, and average pace. This simplified estimate uses a MET-based energy formula and does not account for terrain, elevation, pack weight, or individual physiology.
Estimate hiking time from trail distance, elevation gain, and your chosen pace. The estimate assumes one steady pace and does not include breaks or changing trail conditions.
Estimate annual household energy bill savings from a change in energy use, using your current annual bill and the expected percentage reduction.
Estimate annual household carbon dioxide equivalent emissions from home energy, driving, and air travel using simplified activity factors. Results are illustrative and depend on the factors shown.
Estimate the total weight of household waste from the number of bags and the average weight of each bag.
Estimate daily household water use from the number of residents and their average daily indoor use per person. This simple worksheet-style estimate excludes outdoor watering and other unentered uses.
Convert a measured map distance into an estimated real-world distance using the map scale ratio. Enter the map measurement and the scale denominator, then choose the output unit.
Calculate the square-foot area covered by a rectangular outdoor shade area using its width and length in feet.
Convert a running or walking pace in minutes per mile into speed in miles per hour (mph). Enter the minutes and seconds for one mile to see the equivalent speed.
Estimate distance in miles by multiplying your paddling speed in miles per hour by the hours you paddle. This is a steady-pace estimate and does not account for stops or changing conditions.
Estimate a simple weekly household plastic footprint by adding the mass of selected disposable plastic items. Enter the number of each item used in a typical week; the estimate uses fixed, clearly stated average item weights and does not measure all plastic consumption.
Estimate the rainwater volume that a roof could collect from a rainfall event. This simple estimate assumes a 0.623-gallon yield per square foot per inch of rain before applying the selected collection efficiency.
Estimate the annual volume of rainwater that could be collected from a roof using its area, local annual rainfall, and an assumed collection efficiency.
Estimate the number of sandbags needed to cover a planned barrier using its length, target height, and the approximate usable coverage from each filled bag. This is a planning estimate, not a flood-protection design.
Estimate solar energy production from panel capacity, peak sun hours, system efficiency, and the number of days in your estimate.
Estimate the solar panel capacity needed to supply a daily electricity target from your available peak sun hours, with an adjustment for system losses. This is a planning estimate, not an electrical system design.
Estimate the simple payback period for a solar installation from its upfront cost, incentives, annual electricity savings, and yearly savings change. This worksheet-style estimate assumes the listed savings are measured in the first year and excludes financing, maintenance, and utility-rate details unless they are reflected in your inputs.
Estimate runoff volume from a rainfall event using contributing area, rainfall depth, and an assumed runoff coefficient. Results are a simplified planning estimate.
Estimate modeled carbon dioxide uptake across a group of trees over a chosen period using a user supplied annual uptake rate and survival percentage.
Estimate the share of waste diverted from disposal by comparing the weight diverted through reuse, recycling, or composting with the weight sent to disposal.
Estimate a water bill from metered usage, a user-entered rate per unit, and a fixed monthly charge. This simple estimate excludes taxes and other charges unless included in the fixed charge.
Estimate average water flow rate by measuring the volume collected over a timed interval. The result is expressed in liters per minute and assumes steady flow during the measurement.
Estimate a household's daily direct water use from showers, toilet flushes, laundry loads, and dishwashing. This worksheet-style estimate uses stated per-use assumptions and does not measure indirect water embedded in food, energy, or products.
Estimate wind chill in degrees Fahrenheit from air temperature and wind speed using the standard North American wind chill equation. This estimate applies when air temperature is 50°F or below and wind speed is above 3 mph.