The OLIGHT Baldr S pairs a white LED light with a low-output green beam in a compact rail-mounted package.
This olight baldr s 800 lumens review looks at its output options, mounting fit, charging, and the practical tradeoffs for buyers considering that combination.
Baldr S Review Summary
The quick verdict

4,000+ ratings
Read Amazon ReviewsOLIGHT Baldr S
A compact rail-mounted light for buyers who want white illumination, a green beam, rechargeable power, and controls accessible from either hand.
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL or Picatinny rails; the GL fit is preinstalled and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges fully in about 80 minutes.
Pros
- Combines a white LED light and a green beam in one compact rail-mounted unit.
- Provides both a high-output setting up to 800 lumens and a lower 100-lumen mode.
Consider before buying
- The 140-minute maximum runtime applies to the 100-lumen mode, so buyers should not assume the same duration at higher output.
- The battery is built in, so ongoing use depends on recharging rather than swapping in a fresh cell.
Read the full review summary
The Baldr S is designed for users who want an attached light with two distinct functions: white illumination with output up to 800 lumens and a green beam rated below 5 mW in Class 3R.
It also offers a 100-lumen low mode, giving buyers an alternative when full output is more than they need indoors.
Its dual ambidextrous switches support momentary or constant-on operation from either side, and the included Picatinny adapter adds flexibility alongside the preinstalled GL rail fit.
The built-in rechargeable battery keeps the setup self-contained, though its maximum 140-minute runtime applies to the 100-lumen setting, not the highest output.
The buying factors
Baldr S Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Output options
Up to 800 lumens plus a 100-lumen low mode gives buyers two useful white-light levels; the green beam adds a separate function.
Rail compatibility
It is configured for GL rails and includes a Picatinny adapter, covering two common mounting formats described for the light.
Controls
Dual ambidextrous switches and momentary or constant-on activation offer straightforward control from either hand.
Charging convenience
The built-in battery charges magnetically and reaches a full charge in 80 minutes, but charging depends on the supplied style of connection.
Runtime clarity
The stated maximum of 140 minutes is useful context, but it is specifically for 100-lumen operation.
Compact setup
The product is described as a compact rail-mounted light, combining white output and a green beam in one unit.
Key Features and Specifications of Baldr S
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL or Picatinny rails; the GL fit is preinstalled and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges fully in about 80 minutes.
- Maximum runtime is 140 minutes when operated at 100 lumens.
- Dual ambidextrous switches support momentary-on and constant-on activation.
Pros and Cons of Baldr S
Pros
- Combines a white LED light and a green beam in one compact rail-mounted unit.
- Provides both a high-output setting up to 800 lumens and a lower 100-lumen mode.
- Includes fit options for GL and Picatinny rails.
- Ambidextrous controls support momentary or constant-on use from either side.
- Magnetic USB charging avoids replacing the built-in battery.
Consider before buying
- The 140-minute maximum runtime applies to the 100-lumen mode, so buyers should not assume the same duration at higher output.
- The battery is built in, so ongoing use depends on recharging rather than swapping in a fresh cell.
- Rail fit is described as covering most GL or Picatinny rails; check the specific rail and available mounting space before choosing.
Who Should Buy Baldr S?
Good fit
Consider the Baldr S if you want one rail-mounted unit that pairs white illumination with a green beam and gives you a distinct lower-output option.
The combination may suit buyers who value those two functions together and prefer controls reachable from either hand.
It is also a reasonable fit if your setup uses a GL or Picatinny rail and you want to recharge rather than replace the battery.
Confirm the rail format and mounting clearance for your particular setup, and plan around the fact that the stated 140-minute maximum is for the 100-lumen mode.
Who should skip it
Skip it if you need a light with a user-replaceable battery or if you require a specified runtime at the highest output; those needs are not addressed by the product details here.
Look elsewhere if a green beam is not useful to you and you would rather choose a simpler white-light-only design.
How the Baldr S’s light, mounting, and controls fit together
Two light functions, one rail-mounted unit
The white LED and green beam give this model a combination-focused design.
The white output reaches up to 800 lumens and can also be set to 100 lumens; buyers who only need white illumination may not need the extra beam function, while those who value both can keep them in one compact unit.
Choose a mode with runtime in mind
A maximum runtime of 140 minutes is specified for the 100-lumen mode. That gives a useful reference point for lower-output use, but it does not establish how long the light runs at its highest setting.
If duration at higher output is central to your decision, seek mode-specific runtime information before buying.
Confirm the rail before installation
The package is described as fitting most GL or Picatinny rails, with GL already installed and a Picatinny adapter included.
Since “most” does not guarantee fit with every configuration, compare your rail format and available space with the included mounting arrangement before committing.
Controls and charging shape daily use
The dual ambidextrous switches provide momentary-on and constant-on activation, useful distinctions for buyers who want more than one way to operate the light.
The built-in battery charges in about 80 minutes through magnetic USB charging; the tradeoff is that recharging, rather than replacing a battery, is part of maintaining readiness.
Alternatives to Baldr S
Tactical Flashlights alternative

1,000+ ratings
Read Amazon ReviewsOLIGHT PL-3R Valkyrie
Choose the Baldr S if the green beam and 100-lumen low mode are important to your setup.
Consider the PL-3R if you prefer the higher stated white-light output and its listed strobe and lockout modes; the supplied details do not establish comparable green-beam functionality on that model.
- The PL-3R Valkyrie offers up to 1,500 lumens and 10,200 candela, GL and Picatinny compatibility with an adjustable rail mount and interchangeable inserts, and momentary-on, constant-on, strobe, and lockout modes.
- The Baldr S combines white output up to 800 lumens with a Class 3R green beam below 5 mW, plus a 100-lumen mode and magnetic USB charging.
Tactical Flashlights alternative

18,000+ ratings
Read Amazon ReviewsOLIGHT PL-Mini 2
Consider the PL-Mini 2 if you want a white-light-only option with an adjustable rail position and a specified beam distance.
The Baldr S is the more relevant fit if you want the green beam and 100-lumen setting alongside higher maximum white output.
- The PL-Mini 2 is a rail-mounted white light with 600 lumens and a stated 100-meter beam distance.
- Its adjustable rail position supports GL and 1913 Picatinny fit, and it uses magnetic USB charging.
- The Baldr S reaches up to 800 lumens, adds a green beam, and includes a 100-lumen mode with a stated maximum runtime of 140 minutes at that setting.
Is Baldr S Worth It?
The OLIGHT Baldr S is worth considering if you want a compact rail-mounted light that combines white illumination, a green beam, two output levels, and ambidextrous controls.
Its GL and Picatinny adapter options and magnetic charging add practical flexibility.
Buy it after confirming rail fit and deciding whether the green beam is useful to you.
Keep the runtime claim in context: 140 minutes is the maximum at 100 lumens, and the built-in battery means recharging is part of regular use.
Your review at a glance

4,000+ ratings
Read Amazon ReviewsOLIGHT Baldr S
A compact rail-mounted light for buyers who want white illumination, a green beam, rechargeable power, and controls accessible from either hand.
- White LED output reaches up to 800 lumens, with a separate 100-lumen low mode.
- Green beam output is below 5 mW and classified as Class 3R.
- Designed to fit most GL or Picatinny rails; the GL fit is preinstalled and a Picatinny adapter is included.
- Built-in 3.7 V, 380 mAh lithium polymer battery charges fully in about 80 minutes.